Podophyllotoxin derivatives as an excellent anticancer aspirant for future chemotherapy: A key current imminent needs.

Cancer is one of the leading groups of threatened caused by abnormal state cell growth and second leading diseases involved in the major global death. To treat this, research looking for promising anticancer drugs from natural resource, or synthesized novel molecules by diverse group of scientists worldwide. Currently, drugs get into clinical practices and showing side effects with target actions which in turn leading to multidrug resistance unknowingly. Podophyllotoxin, a naturally occurring lignan and with hybrids have become one of the most attractive subjects due to their broad spectrum of pharmacological activities. Podophyllotoxin derivatives have been the centre of attention of extensive chemical amendment and pharmacological investigation in modern decades. Mainly, the innovation of the semi-synthetic anticancer drugs etoposide and teniposide has stimulated prolonged research interest in this structural phenotype. The present review focuses mainly onnew anticancer drugs from podophyllotoxin analogs, mechanism of action and their structure-activity relationships (SAR) as potential anticancer candidates for future discovery of suitable drug candidates.

Assembly of protonated mesoporous carbon nitrides with co-catalytic [Mo3S13]2- clusters for photocatalytic hydrogen production.

The photocatalytic activity of protonated ordered mesoporous carbon nitride (pom-CN) was significantly improved by assembling anionic [Mo3S13]2- clusters as cocatalysts onto the surface and channel of pom-CN via electrostatic interactions. This work demonstrates the feasibility of employing solution chemistry to assemble co-catalysts in the form of ionic clusters as building blocks into a photosynthetic architecture.

Influence of the Reaction Temperature on the Nature of the Active and Deactivating Species During Methanol-to-Olefins Conversion over H-SAPO-34.

The selectivity toward lower olefins during the methanol-to-olefins conversion over H-SAPO-34 at reaction temperatures between 573 and 773 K has been studied with a combination of operando UV-vis diffuse reflectance spectroscopy and online gas chromatography. It was found that the selectivity toward propylene increases in the temperature range of 573-623 K, while it decreases in the temperature range of 623-773 K. The high degree of incorporation of olefins, mainly propylene, into the hydrocarbon pool affects the product selectivity at lower reaction temperatures. The nature and dynamics of the active and deactivating hydrocarbon species with increasing reaction temperature were revealed by a non-negative matrix factorization of the time-resolved operando UV-vis diffuse reflectance spectra. The active hydrocarbon pool species consist of mainly highly methylated benzene carbocations at temperatures between 573 and 598 K, of both highly methylated benzene carbocations and methylated naphthalene carbocations at 623 K, and of only methylated naphthalene carbocations at temperatures between 673 and 773 K. The operando spectroscopy results suggest that the nature of the active species also influences the olefin selectivity. In fact, monoenylic and highly methylated benzene carbocations are more selective to the formation of propylene, whereas the formation of the group of low methylated benzene carbocations and methylated naphthalene carbocations at higher reaction temperatures (i.e., 673 and 773 K) favors the formation of ethylene. At reaction temperatures between 573 and 623 K, catalyst deactivation is caused by the gradual filling of the micropores with methylated naphthalene carbocations, while between 623 and 773 K the formation of neutral poly aromatics and phenanthrene/anthracene carbocations are mainly responsible for catalyst deactivation, their respective contribution increasing with increasing reaction temperature. Methanol pulse experiments at different temperatures demonstrate the dynamics between methylated benzene and methylated naphthalene carbocations. It was found that methylated naphthalene carbocations species are deactivating and block the micropores at low reaction temperatures, while acting as the active species at higher reaction temperatures, although they give rise to the formation of extended hydrocarbon deposits.

Photoreactivity, Optical Behavior and DFT Studies of 2,5-Bis[4-choloro-acetyl(thiophen-2-ylmethylene)]cyclopentanone BCTCP in Different Solvents.

Diarylidenecyclopentanone compound namely, 2,5-bis[4-choloroacetyl-(thiophen-2-ylmethylene)]cyclopentanone (BCTCP) was firstly synthesized using the normal condition of Friedel-Crafts method by reacting 2,5-bis(thiophen-2-ylmethylene)cyclopentanone (BTCP) with chloroacetyl chloride in the presence of aluminum chloride anhydrous. The structure of this compound was confirmed by elemental and spectral analyses including FT-IR, 1H-NMR, 13C-NMR and mass spectrometry. The electronic absorption and emission properties of BCTCP were studied in different solvents. BCTCP displays a slight solvatochromic effect of the absorption and emission spectrum, indicating a small change in dipole moment of BCTCP upon excitation. BCTCP displayed photodecomposition in chlorinated solvents upon irradiating with 365 nm light. Ground and excited states electronic geometric optimizations were performed using density functional theory (DFT) and time-dependent density functional theory (TD-DFT), respectively. A DFT natural bond orbital (NBO) analysis complemented the intramolecular charge transfer (ICT). The simulated maximum absorption and emission wavelengths are in line the observed ones in trend, and were proportionally red-shifted with the increase of the solvent polarity. The stability, hardness and electrophilicity of BCTCP in different solvents were correlated with the polarity of the elected solvents.

Physicochemical characterization of black seed oil-milk emulsions through ultrasonication.

The ultrasonic formation of stable emulsions of a bioactive material, black seed oil, in skim milk was investigated. The incorporation of 7% of black seed oil in pasteurised homogenized skim milk (PHSM) using 20kHz high intensity ultrasound was successfully achieved. The effect of sonication time and acoustic power on the emulsion stability was studied. A minimum process time of 8min at an applied acoustic power of 100W was sufficient to produce emulsion droplets stable for at least 8days upon storage at 4±2°C, which was confirmed through creaming stability, particle size, rheology and color analysis. Partially denatured whey proteins may provide stability to the emulsion droplets and in addition to the cavitation effects of ultrasound are responsible for the production of smaller sized emulsion droplets.

Conformational, electronic, and spectroscopic characterization of isophthalic acid (monomer and dimer structures) experimentally and by DFT.

Isophthalic acid (C6H4(CO2H)2) is a noteworthy organic compound widely used in coating and synthesis of resins and the production of commercially important polymers such as drink plastic bottles. The effects of isophthalic acid (IPA) on human health, toxicology, and biodegradability are the main focus of many researchers. Because structural and spectroscopic investigation of molecules provides a deep understanding of interactional behaviors of compounds, this study stands for exploring those features. Therefore, the spectroscopic, structural, electronic, and thermodynamical properties of IPA were thoroughly studied in this work experimentally using UV-Vis, (1)H and (13)C NMR, FT-IR, FT-Raman and theoretically via DFT and TD-DFT calculations. The UV-Vis absorption spectrum in water was taken in the region 200-400nm. The NMR chemical shifts ((1)H and (13)C) were recorded in DMSO solution. The infrared and Raman spectra of the solid IPA were recorded in the range of 4000-400cm(-1) and 3500-50cm(-1), respectively. DFT and TD-DFT calculations were performed at the level of B3LYP/6-311++G(d,p) in determination of geometrical structure, electronic structure analysis and normal mode. The (13)C and (1)H nuclear magnetic resonance (NMR) spectra were estimated by using the gauge-invariant atomic orbital (GIAO) method. The scaled quantum mechanics (SQM) method was used to determine the total energy distribution (TED) to assign the vibrational modes accurately. Weak interactions such as hydrogen bonding and Van der Walls were analyzed via reduced density gradient (RDG) analysis in monomeric and dimeric forms. Furthermore, the excitation energies, density of state (DOS) diagram, thermodynamical properties, molecular electro-static potential (MEP), and nonlinear optical (NLO) properties were obtained.

Experimental (FT-IR, FT-Raman, UV and NMR) and quantum chemical studies on molecular structure, spectroscopic analysis, NLO, NBO and reactivity descriptors of 3,5-Difluoroaniline.

Comprehensive investigation of geometrical and electronic structure in ground as well as the first excited state of 3,5-Difluoroaniline (C6H5NF2) was carried out. The experimentally observed spectral data (FT-TR and FT-Raman) of the title compound was compared with the spectral data obtained by DFT/B3LYP method using 6-311++G(d,p) basis set. The molecular properties like dipole moment, polarizability, first static hyperpolarizability, molecular electrostatic potential surface (MEPs), and contour map were calculated to get a better insight of the properties of the title molecule. Natural bond orbital (NBO) analysis was applied to study stability of the molecule arising from charge delocalization. UV-Vis spectrum of the title compound was also recorded and the electronic properties, such as Frontier orbitals and band gap energies were measured by TD-DFT approach. Total and partial density of state (TDOS and PDOS) and also overlap population density of state (OPDOS) diagrams analysis were presented. Global and local reactivity descriptors were computed to predict reactivity and reactive sites on the molecule. (1)H and (13)C NMR spectra by using gauge including atomic orbital (GIAO) method of studied compound were compared with experimental data obtained. Moreover, the thermodynamic properties were evaluated.

DFT calculations and experimental FT-IR, FT-Raman, NMR, UV-Vis spectral studies of 3-fluorophenylboronic acid.

The spectroscopic (FT-IR, FT-Raman, (1)H and (13)C NMR, UV-Vis), structural, electronic and thermodynamical properties of 3-fluorophenylboronic acid (C6H4FB(OH)2), 3FPBA) were submitted by using both experimental techniques and theoretical methods (quantum chemical calculations) in this work. The experimental infrared and Raman spectra were obtained in the region 4000-400 cm(-1) and 3500-10 cm(-1), respectively. The equilibrium geometry and vibrational spectra were calculated by using DFT (B3LYP) with 6-311++G(d,p) basis set. The vibrational wavenumbers were also corrected with scale factor to take better results for the calculated data. The total energy distributions (TED) of the vibrational modes were performed for the assignments of the title molecule by using scaled quantum mechanics (SQM) method. The NMR chemical shifts ((1)H and (13)C) were recorded in DMSO solution. The (1)H and (13)C NMR spectra were computed by using the gauge-invariant atomic orbital (GIAO) method, showing a good agreement with the experimental ones. The last one UV-Vis absorption spectra were analyzed in two solvents (ethanol and water), saved in the range of 200-400 nm. In addition these, HOMO and LUMO energies, the excitation energies, density of states (DOS) diagrams, thermodynamical properties and molecular electrostatic potential surface (MEPs) were presented. Nonlinear optical (NLO) properties and thermodynamic features were performed. The experimental results are combined with the theoretical calculations using DFT calculations to fortification of the paper. At the end of this work, the results were proved our paper had been indispensable for the literature backing.

Spectral features, electric properties, NBO analysis and reactivity descriptors of 2-(2-Benzothiazolylthio)-Ethanol: Combined experimental and DFT studies.

Quantum chemical calculations of ground state energy, geometrical structure and vibrational wavenumbers, nuclear magnetic behaviors, electronic absorption spectra along with the nonlinear optical properties of 2-(2-benzothiazolylthio)-ethanol (BTZTE) were carried out using density functional (DFT/B3LYP) method with 6-311++G(d,p) as basis set. The FT-IR and FT-Raman spectra were measured in the condensed state. The fundamental vibrational wavenumbers as well as their intensities were calculated, and a good correlation between experimental and scaled calculated wavenumbers was accomplished. The electric dipole moment, polarizability and the first hyperpolarizability values of the BTZTE were calculated at the same level of theory and basis set. The results show that the BTZTE molecule possesses nonlinear optical (NLO) behavior with non-zero values. Stability of the molecule arising from hyper-conjugative interactions and charge delocalization was analyzed using natural bond orbital (NBO) analysis. UV spectrum of the studied molecule was recorded in the region 200-500nm and the electronic properties were predicted by time-dependent DFT approach. The calculated transition energies are in good concurrency with the experimental data. (1)H nuclear magnetic resonance (NMR) chemical shifts of the title molecule were calculated by the gauge independent atomic orbital (GIAO) method and compared with experimental results. The thermodynamic properties of the studied compound at different temperatures were calculated. Global and local reactivity descriptors were computed to predict reactivity and reactive sites on the molecule.

FT-IR, FT-Raman and UV spectroscopic investigation, electronic properties, electric moments, and NBO analysis of anethole using quantum chemical calculations.

FT-IR and FT-Raman spectra of anethole (1-Methoxy-4-(1-propenyl)benzene), a flavoring agent of commercial value, have been recorded in the regions 4000-400 and 4000-100cm(-1) respectively. The structure of the title molecule has been optimized and the structural parameters have been calculated by DFT/B3LYP method with 6-311++G(d,p) basis set. The fundamental vibrational wavenumbers as well as their intensities were calculated and a good agreement between observed and scaled calculated wavenumbers has been achieved. UV-Vis spectrum of the title compound was recorded in the region 200-500nm and the electronic properties such as HOMO and LUMO energies and associated energy gap were calculated by Time dependent-density functional theory (TD-DFT) approach. Nonlinear optical (NLO) study divulges the nonlinear properties of the molecule. Stability of the title molecule arising from hyper-conjugative interactions and charge delocalization has been investigated using natural bond orbital (NBO) analysis. The theoretical results were found to be in coherence with the measured experimental data.

Experimental determination of ground and excited state dipole moments of N, N-bis (2, 5-di-tert-butylphenyl)-3, 4:9, 10-perylenebis (dicarboximide) (DBPI) a photostable laser dye.

In the present work, the absorption, emission spectra and dipole moments(µ(g), µ(e)) of N, N-bis (2, 5-di-tert-butylphenyl)-3, 4:9, 10- perylenebis (dicarboximide) (DBPI) have been studied in solvents of various polarities at room temperature. Using the methods of solvatochromism, the difference between the first excited singlet state (µ(e)) and ground state (µ(g)) dipole moments was estimated from Lippert - Mataga,, Bakhshiev, Kawski - Chamma - Viallet equations. The change in dipole moment (Δµ) was also calculated using the variation of the Stokes shift with microscopic solvent polarity parameter (E(T)(N)). It was observed that the value of excited singlet state dipole moment is higher (3.53 Debye) than the ground state one (1.92Debye), showing that the excited state of DBPI is more polar than the ground state.

Vibrational and UV spectra, first order hyperpolarizability, NBO and HOMO-LUMO analysis of 4-chloro-N-(2-methyl-2,3-dihydroindol-1-yl)-3-sulfamoyl-benzamide.

In this work, the vibrational spectral analysis was carried out by using FT-Raman and FT-IR spectroscopy in the range 4000-100 cm(-1) and 4000-400 cm(-1), respectively, for 4-chloro-N-(2-methyl-2,3-dihydroindol-1-yl)-3-sulfamoyl-benzamide (C16H16O3N3SCl) molecule. Theoretical calculations were performed by density functional theory (DFT) method using 6-31G(d,p) and 6-311G(d,p) basis sets. The complete vibrational assignments of wavenumbers were made on the basis of potential energy distribution (PED). The results of the calculations were applied to simulated spectra of the title compound, which show excellent agreement with observed spectra. The frontier orbital energy gap and dipole moment illustrates the high reactivity of the title molecule. The first order hyperpolarizability (ß0) and related properties (µ, α, and Δα) of the molecule were also calculated. Stability of the molecule arising from hyperconjugative interactions and charge delocalization has been analyzed using natural bond orbital (NBO) analysis. The UV-vis spectrum of the compound was recorded in the region 200-400 nm in ethanol and electronic properties such as excitation energies, oscillator strength and wavelength were calculated by TD-DFT/B3LYP method. Molecular electrostatic potential (MEP) and HOMO-LUMO energy levels are also constructed. The thermodynamic properties of the title compound were calculated at different temperatures.

Quantum-chemical (DFT, MP2) and spectroscopic studies (FT-IR and UV) of monomeric and dimeric structures of 2(3H)-Benzothiazolone.

Molecular geometry and vibrational wavenumbers of 2(3H)-Benzothiazolone (C7H5NSO, HBT) was investigated using density functional (DFT/B3LYP) method with 6-311+G(d,p) basis set. The vibrational wavenumbers are found to be in good agreement with experimental FT-IR spectra. Hydrogen-bonded dimer of HBT, optimized by counterpoise correction, was studied by MP2 and DFT/B3LYP at the 6-311+G(d,p) level and the effects of molecular association through NH---O hydrogen bonding were discussed. A detailed analysis of the nature of the hydrogen bonding, using topological parameters, such as electronic charge density, Laplacian, kinetic and potential energy density evaluated at bond critical points (BCP) has also been presented. The UV absorption spectra of the compound dissolved in ethanol and chloroform solutions were recorded in the range of 200-600 nm. The UV-vis spectrum of the title molecule was also calculated using TD-DFT method. The calculated energy and oscillator strength almost exactly reproduce the experimental data. Total and partial density of state (TDOS, PDOS) of the HBT in terms of HOMOs and LUMOs and molecular electrostatic potential (MEP) were calculated and analyzed. The electric dipole moment, polarizability and the first static hyper-polarizability values for HBT were calculated at the DFT/B3LYP with 6-311+G(d,p) basis set. The results also show that the HBT molecule may have nonlinear optical (NLO) comportment with non-zero values. Stability of the molecule arising from hyper-conjugative interactions and charge delocalization was analyzed using natural bond orbital (NBO) analysis.

Identification of structural and spectral features of synthesized cyano-stilbene dye derivatives: a comparative experimental and DFT study.

The synthesized three dye derivatives of cyano-stilbene monomer were identified by experimental spectroscopic techniques and density functional approach. The optimized geometrical structure, vibrational and electronic transitions along with the nonlinear optical (NLO) properties of those compounds were presented in this study. The vibrational spectra of investigated compounds were recorded in solid state with FT-IR and FT-Raman spectrometry in the range of 4000-400 cm(-1) and 3600-50 cm(-1), respectively. The theoretical ground state equilibrium conformations and vibrational wavenumbers were carried out by using density functional method with 6-311G(d,p) basis set. Assignments of the fundamental vibrational modes were examined on the basis of the measured data and total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanical (SQM) method. The UV absorption spectra of monomers were observed in the range of 200-600 nm in chloroform, acetonitrile and toluene, and time dependent DFT method was used to obtain the electronic properties. The linear polarizability and first hyperpolarizability of the studied molecules indicates that the title compounds can be used as a good nonlinear optical material. A detailed description of spectroscopic behaviors of compounds was given based on the comparison of experimental measurements and theoretical computations.

FT-IR and FT-Raman, NMR and UV spectroscopic investigation and hybrid computational (HF and DFT) analysis on the molecular structure of mesitylene.

The spectroscopic properties of mesitylene were investigated by FT-IR, FT-Raman, UV, (1)H and (13)C NMR techniques. The geometrical parameters and energies have been obtained from density functional theory (DFT) B3LYP method and Hartree-Fock (HF) method with 6-311++G(d,p) and 6-311G(d,p) basis sets calculations. The geometry of the molecule was fully optimized, vibrational spectra were calculated and fundamental vibrations were assigned on the basis of the total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method and PQS program. Total and partial density of state (TDOS and PDOS) and also overlap population density of state (OPDOS) diagrams analysis were presented. (13)C and (1)H NMR chemical shifts were calculated by using the gauge-invariant atomic orbital (GIAO) method. The electronic properties, such as excitation energies, oscillator strength, wavelengths, HOMO and LUMO energies, were performed by time-dependent density functional theory (TD-DFT) results complements with the experimental findings. The results of the calculations were applied to simulate spectra of the title compound, which show excellent agreement with observed spectra. Besides, frontier molecular orbitals (FMO), molecular electrostatic potential (MEP) and thermodynamic properties were performed. Reduced density gradient (RDG) of the mesitylene was also given to investigate interactions of the molecule.

On the spectroscopic analyses of (E)-3-(dicyclopropyl methylene)-dihydro-4-[1-(2,5 dimethylfuran-3-yl) ethylidene]furan-2,5-dione.

In this work, a combined experimental and theoretical study on molecular structure and vibrational frequencies of (E)-3-(dicyclopropyl methylene)-dihydro-4-[1-(2,5 dimethylfuran-3-yl) ethylidene] furan-2,5-dione [DCPF] were reported. The FT-IR spectra of DCPF isomers are recorded in the solid phase. The equilibrium geometries, harmonic vibrational frequencies, thermo-chemical parameters, total dipole moment and HOMO-LUMO energies are calculated by density functional theory DFT/B3LYP utilizing 6-311G(d,p) basis set. Results showed that scaled frequencies are in good agreement with experimental values. The HOMOs and the LUMOs energies of DCPF isomers were 3.8 and 2.7eV for E and C isomers,respectively.

New clerodane diterpenoid and flavonol-3-methyl ethers from Dodonaea viscosa.

Chromatographic separation of the extract of the aerial parts of Dodonaea viscosa L. (family Sapindaceae) afforded beta-sitosterol, stigmasterol, the flavone acacetin-7-methyl ether, the flavonol-3-methyl ethers 4',5,7-trihydroxy-3,6-dimethoxyflavone and penduletin, as well as a new clerodane diterpenoid which was identified by spectral means as 15,16-epoxy-5,9-diepicleroda-3,13(16),14-trien-20,19-olide.